How to add Signature pic in VB

[Eskimo]

I noticed some of your pics aren't working and thought to point out how it works with VB. I hope some of you find this useful!

Goto usercp

rt click edit signature

near bottom you'll see upload signature picture- either point to its web local or point to it on your machine

click on save signature- when it comes up you will see your picture in the preview area

in the box over your picture (edit signature box) type "[_sigpic][_/sigpic]" if you want on left side or if like me "[_right][_sigpic][_/sigpic][_/right]" to have it show up on right P.S. do not type address of picture between the words "[_sigpic][_/sigpic]" had to add _ so code could be seen so leave off when typing in your code :)

click on save signature- after it reloads in the preview area at top you will see your signature


I hope this helps some of you :)

[sharp65]

It should automatically add so you shouldn't have to type it in yourself. But if it doesn't this what you do.

[batmanuel]

I clearly don't get it. Mine is a link also... that a problem?

[sharp65]

Start from a clean slate, make your signature area blank. UserCP >> Edit Signature >> go to the second block where you can enter a url or upload a file. That should be it.

[Eskimo]

[ sigpic][/sigpic] is the correct code so leave off the _ I put in earlier cause I couldn't figure out how to show code :P but this is not where you add your pics address. so typing [ SIGPIC]http://boinc.mundayweb.com/one/stats.php/userID:4628/transff/.png[/SIGPIC] will not work so go to

usercp

edit signature

goto "Signature Picture" box under "Upload Signature Picture" on the option 1 line put in http://boinc.mundayweb.com/one/stats.php/userID:4628/transff/.png and hit "save signature" button the forums will reload and in the "Your Current Signature Picture" box you will see your picture

In the "Edit Signature" box you type the sigpic code do not add your address just [ sigpic][/sigpic] I added a space in the first part of code so it could be seen leave off, then hit "save signature" button again and the forums will reload and in the preview area you will see your signature :)

[batmanuel]

But I don't really want to upload a pic...since it's dynamically generated. I think. :P

[Eskimo]

I do not know what to do with that??? I know what you mean that the sig constantly changes but do not know how to use those with VB since I do not have one... but by reading your sig try leaving off the _ I put that in the original post only so you could see the code sorry : ) so maybe that'll help??? I am not sure!

[sharp65]

Use the noparse BBcode so you don't confuse him. The only thing that should be in that box where you can put in text is . And then you use the lower part to either upload a file or put in the link of it. For some reason it's not working.

[snc8698]

i got it to work fine

just as long as you put {sigpic}{/sigpic} in the signature text field...only dont hold down shift when you hit the {} buttons so you get regular bbcode brackets

[batmanuel]

It says it's an invalid URL when I try to put mine in. This must be a "feature". I'll have to see if there's a hack/mod for it.

[QLI]

Ahhh, got it finally. Thanks guys.

[snc8698]

Batman, firstly, delete the url in your signature text box. All you should have in there is the SIGPIC and /SIGPIC codes

secondly, remove the space you have between the first bracket and the S in SIGPIC, do the same for the space between the brack and the /S in /SIGPIC

[batmanuel]

Batman, firstly, delete the url in your signature text box. All you should have in there is the SIGPIC and /SIGPIC codes

secondly, remove the space you have between the first bracket and the S in SIGPIC, do the same for the space between the brack and the /S in /SIGPIC


It doesn't work because the url is dynamic, I think... or something. I get this message "vBulletin Message: Invalid URL"

[Camiron]

I noticed some of your pics aren't working and thought to point out how it works with VB. I hope some of you find this useful!

Goto usercp

rt click edit signature

near bottom you'll see upload signature picture- either point to its web local or point to it on your machine

click on save signature- when it comes up you will see your picture in the preview area

in the box over your picture (edit signature box) type "[_sigpic][_/sigpic]" if you want on left side or if like me "[_right][_sigpic][_/sigpic][_/right]" to have it show up on right P.S. do not type address of picture between the words "[_sigpic][_/sigpic]" had to add _ so code could be seen so leave off when typing in your code :)

click on save signature- after it reloads in the preview area at top you will see your signature


I hope this helps some of you :)


Yay, thanks